Wet & Rust Tolerant Coatings
Applications
Chemco’s wet & rust tolerant coating systems have truly revolutionised the Protective & Marine Coatings Industry. These systems exhibits exceptional adhesion to rusty or poorly prepared and wet surfaces and have been proven to significantly reduce the overall time and cost of a project.
These proven advanced speciality coatings have not only passed independent laboratory tests, they have also been approved and used by almost all major shipping companies worldwide with complete success. They are supported by the most comprehensive and transferable guarantees for complete refurbishment, new build and uniquely for patch repair work.
Solutions
Solvent-Free, Wet & Rust Tolerant Epoxy Primer/Finish Coating System
RS 500P is a solvent-free, wet & rust tolerant primer or primer-finish epoxy coating.
The use of special sacrificial fillers enables the coating to be applied to surface standards as low as WJ-4, St 2.
The system’s long-term performance is based on completely sealing (porous-free film) and arresting the rust totally.
RS 500P combines with Epo-chem™ RA 500M to make a multi-functional, groundbreaking coating system which has been extensively used across many industries.
Wet, Rust & Oil Tolerant Primer/Finish Coating System
RL 500PF is a wet & rust tolerant, two pack, high solids epoxy coating.
It can be utilised either as a one coat primer/finish with good UV resistance or as a high performance coating which can be over-coated with colour topcoats.
RL 500PF can be applied and operated in temperatures up to 150°C.
Explore Our Products
Authorised Australian distributor of quality Chemco International Products
