Aggressive industrial environments require the highest quality corrosion protection products.
This is why we exclusively use and recommend Chemco International corrosion and abrasion resistant systems.
Chemco products deliver leading edge technology backed by 40 years of research and development. Advanced polymer fibres specifically engineered for anti-corrosion coatings deliver superior, long-lasting results in extreme corrosion environments.
Chemcote is an approved Australian Distributor and Applicator of Chemco International protective coating systems.
Authorised Australian distributor of quality Chemco International Products
Chem-tect Vinyl ester glass flake systems offer long-term corrosion protection across the full pH range of 1-14. It is particularly good in acidic environments at high temperatures where epoxies are not effective. It is based on the combination of the highest quality Vinyl ester resin systems and different sizes of glass flake, offering a complete engineered solution for some of the most aggressive environments.
Excellent resistance to severe chemical, corrosive and abrasive environments. Ideally suitable for Caustic alkalies, hypochlorite bleaches & organic solvents. Temp. Res. Max.110°C.
Conductive version of RB 300. Used where combination of high chemical resistance & conductivity is required or when chemical environments can attack glass flake.
Excellent resistance to high temperatures, thermal ageing, severe chemical, corrosive and abrasive environments. Particularly designed for applications where high temperature, immersed environments exist. Providing resistance to a combination of aggressive chemicals and severe abrasion. Suitable for new applications and refurbishment of tanks, pipes, chutes and fluid flow equipment.
Excellent resistance to high temperatures, thermal ageing, aggressive chemicals including acids, corrosive and abrasive environments. Ideal tank lining. Temp. res. Max. 125ºC.
Suitable for specialist applications and as a repair material. Offers outstanding adhesion properties to many substrates especially stainless steel, other metals and concrete.
Excellent adhesion to stainless steel, other metals & concrete. Superior elasticity & flexibility combined with high resistance to impact and severe mechanical stress.
Vinyelster glassflake high temperature up to 155ºC immerse, 180ºC atmospheric.
Epo-Chem series is based on a range of solvent-free Epoxy Resins reinforced with screened glass flake that can be applied to ferrous and nonferrous substrates. They form a durable long term barrier to weathering, corrosion and temperature. These coatings provide excellent long term corrosion protection making them ideal protection for various maintenance or new build applications.
Solvent-free, low odour, outstanding moisture tolerance. Very flexible, excellent chemical & abrasion properties.
A unique solvent-free, biocide-free, non-toxic and non-stick scrubbable hull coating. An environmentally friendly and cost-effective alternative to conventional anti-fouling paints. Providing a tough, impermeable barrier that does not provide support for marine growth. Contains no solvents, biocides or harmful chemicals and there is no release of any toxic ingredients.
Solvent-free, low odour, outstanding moisture tolerance. Very flexible & excellent chemical & abrasion properties. Ideal for Marine & Ballast tank coating and repair. Compatible with coal-tar epoxies.
Solvent-free underwater coating system. Available in 2 versions HV – High Viscosity, LV – Low Viscosity. Main feature: Ease of application, less paint dispersion.
A glass flake filled Solvent-free, damp tolerant epoxy tank lining with FDA approval for alcoholic beverage (particularly suitable for wine and beer tank lining).
Colour topcoat for epoxies UV resistant, colour stable, chemical resistant, high gloss isocyanate and amine-free.
Nuclear, petrochem and pharmaceutical industry approved. Easy to apply
Surface tolerant 100% Solids Novolac Epoxy Primer System resistant to high temperatures
Forms a tough, impermeable barrier suitable for steel and concrete surfaces.Outstanding resistance to most chemical agents, particularly strong acids (including 98% sulphuric acid) alkalines, and many solvents.Solvent-free, low odour system forms a very hard and excellent gloss finish.Ideally suitable for tank and vessel linings in harsh chemical environments.
Outstanding flexibility, good crack bridging, water-proofing membrane, flexible inter layer.
High density epoxy filler/metal putty. Rapid cure, machinable, used with RP 500 or RU 500 top coats.
Solvent-free, low odour, outstanding moisture tolerance. Flexible, excellent chemical & abrasion properties. Ideal for Marine & Ballast tank coating and repair. Compatible with coal-tar epoxies.
Innovative coating, primes & finishes all in one-coat. Resistant to high temperatures up to 150ºC. Zinc Rich Epoxy with outstanding moisture & surface tolerance. Can be applied on new or rusty galvanised, metal, concrete etc. Ideal for Transmission Towers, pipework, jetties, pillars to protect against atmospheric corrosion.
Ceramic coating, very hard wearing & abrasion resistant. Low friction finish to improve efficiency in fluid flow environments. Proven to reduce hang up in ventilation shafts underground on rotating equipment.
Solvent-free, low odour, outstanding moisture/surface tolerant properties. A unique 100% solids epoxy primer suitable for any type of surface preparation e.g. mechanical preparation, UHP, grit blast etc. Specially designed for confine spaces, tank lining, and structural steel.
Ceramic coating, very hard wearing & abrasion resistant. Low friction finish to improve efficiency in fluid flow environments. Much higher temperature & chemical resistance than RP 500.
Solvent -free Novolac with very good thermal and chemical resistance. Specially designed for the most aggressive combination of high temp. & chemicals in immersed condition. Solvent -free, substitute of vinylester.
Multi-purpose, odour free, water-base epoxy primer with exceptional adhesion to all substrates. Barrier coat/ adhesion promoter between incompatible systems.
A ceramic-filled epoxy abrasion-resistant lining. A high-density, high-temperature epoxy lining designed for very aggressive abrasive environments.
Chemco’s range of self-levelling, solvent-free flooring systems are designed to withstand heavy traffic loads, chemical attack and can be formulated for many other uses.
Clear. Extremely moisture tolerant for green and freshly laid concrete. Can be used as a sealant for concrete and priming for secondary coats.
Coatings designed for application in high temperature environments such as pipes, vessels, chimney stacks, flare stacks, precipitators etc. Coatings can be applied on hot or cold surfaces (up to 190°C) without the need to shutdown. High temperature coating solutions designed to withstand up to 100ºC Caustic process application
Can be applied on hot or cold substrates up to 170ºC. Temp. resistance up to 550ºC. Single pack with exceptional UV, chemical resistance. Surface tolerant (MIO-ZINC) modified. Flair / Chimney stacks, pipework etc.
Can be applied on hot or cold substrates up to 170ºC. Temp. resistance up to 550ºC. Single pack with exceptional UV, chemical resistance. Ideally used as a top-coat/sealer. Allows tank lining to cure insitu.
High-Temperature Solvent-free Glassflake Epoxy. Provides a tough, impermeable barrier suitable for steel and concrete surfaces.
Epoxy based filled with ceramic, ideal for high temperature and acid resistance.
Multi-purpose, single pack, water-based silicon topcoat with good corrosion resistance property. Ideal for mufflers, ovens, chimneys, oven inserts, electric and gas heaters, hot stacks, high temperature reaction tanks, etc. Excellent heat resistance up to 350ºC. Higher temperature possible up to 600ºC (based on metallic pigment). Can be applied on hot surface up to 120ºC with care and full PPE (due to little co-solvent content of less than 5%).
Chem-tect Vinyl ester glass flake systems offer long-term corrosion protection across the full pH range of 1-14. It is particularly good in acidic environments at high temperatures where epoxies are not effective. It is based on the combination of the highest quality Vinyl ester resin systems and different sizes of glass flake, offering a complete engineered solution for some of the most aggressive environments.
Excellent resistance to severe chemical, corrosive and abrasive environments. Ideally suitable for Caustic alkalies, hypochlorite bleaches & organic solvents. Temp. Res. Max.110°C.
Conductive version of RB 300. Used where combination of high chemical resistance & conductivity is required or when chemical environments can attack glass flake.
Excellent resistance to high temperatures, thermal ageing, severe chemical, corrosive and abrasive environments. Particularly designed for applications where high temperature, immersed environments exist. Providing resistance to a combination of aggressive chemicals and severe abrasion. Suitable for new applications and refurbishment of tanks, pipes, chutes and fluid flow equipment.
Excellent resistance to high temperatures, thermal ageing, aggressive chemicals including acids, corrosive and abrasive environments. Ideal tank lining. Temp. res. Max. 125ºC.
Suitable for specialist applications and as a repair material. Offers outstanding adhesion properties to many substrates especially stainless steel, other metals and concrete.
Excellent adhesion to stainless steel, other metals & concrete. Superior elasticity & flexibility combined with high resistance to impact and severe mechanical stress.
Vinyelster glassflake high temperature up to 155ºC immerse, 180ºC atmospheric.
Epo-Chem series is based on a range of solvent-free Epoxy Resins reinforced with screened glass flake that can be applied to ferrous and nonferrous substrates. They form a durable long term barrier to weathering, corrosion and temperature. These coatings provide excellent long term corrosion protection making them ideal protection for various maintenance or new build applications.
Solvent-free, low odour, outstanding moisture tolerance. Very flexible, excellent chemical & abrasion properties.
A unique solvent-free, biocide-free, non-toxic and non-stick scrubbable hull coating. An environmentally friendly and cost-effective alternative to conventional anti-fouling paints. Providing a tough, impermeable barrier that does not provide support for marine growth. Contains no solvents, biocides or harmful chemicals and there is no release of any toxic ingredients.
Solvent-free, low odour, outstanding moisture tolerance. Very flexible & excellent chemical & abrasion properties. Ideal for Marine & Ballast tank coating and repair. Compatible with coal-tar epoxies.
Solvent-free underwater coating system. Available in 2 versions HV – High Viscosity, LV – Low Viscosity. Main feature: Ease of application, less paint dispersion.
A glass flake filled Solvent-free, damp tolerant epoxy tank lining with FDA approval for alcoholic beverage (particularly suitable for wine and beer tank lining).
Colour topcoat for epoxies UV resistant, colour stable, chemical resistant, high gloss isocyanate and amine-free.
Nuclear, petrochem and pharmaceutical industry approved. Easy to apply
Surface tolerant 100% Solids Novolac Epoxy Primer System resistant to high temperatures
Forms a tough, impermeable barrier suitable for steel and concrete surfaces.Outstanding resistance to most chemical agents, particularly strong acids (including 98% sulphuric acid) alkalines, and many solvents.Solvent-free, low odour system forms a very hard and excellent gloss finish.Ideally suitable for tank and vessel linings in harsh chemical environments.
Outstanding flexibility, good crack bridging, water-proofing membrane, flexible inter layer.
High density epoxy filler/metal putty. Rapid cure, machinable, used with RP 500 or RU 500 top coats.
Solvent-free, low odour, outstanding moisture tolerance. Flexible, excellent chemical & abrasion properties. Ideal for Marine & Ballast tank coating and repair. Compatible with coal-tar epoxies.
Innovative coating, primes & finishes all in one-coat. Resistant to high temperatures up to 150ºC. Zinc Rich Epoxy with outstanding moisture & surface tolerance. Can be applied on new or rusty galvanised, metal, concrete etc. Ideal for Transmission Towers, pipework, jetties, pillars to protect against atmospheric corrosion.
Ceramic coating, very hard wearing & abrasion resistant. Low friction finish to improve efficiency in fluid flow environments. Proven to reduce hang up in ventilation shafts underground on rotating equipment.
Solvent-free, low odour, outstanding moisture/surface tolerant properties. A unique 100% solids epoxy primer suitable for any type of surface preparation e.g. mechanical preparation, UHP, grit blast etc. Specially designed for confine spaces, tank lining, and structural steel.
Ceramic coating, very hard wearing & abrasion resistant. Low friction finish to improve efficiency in fluid flow environments. Much higher temperature & chemical resistance than RP 500.
Solvent -free Novolac with very good thermal and chemical resistance. Specially designed for the most aggressive combination of high temp. & chemicals in immersed condition. Solvent -free, substitute of vinylester.
Multi-purpose, odour free, water-base epoxy primer with exceptional adhesion to all substrates. Barrier coat/ adhesion promoter between incompatible systems.
A ceramic-filled epoxy abrasion-resistant lining. A high-density, high-temperature epoxy lining designed for very aggressive abrasive environments.
Chemco’s range of self-levelling, solvent-free flooring systems are designed to withstand heavy traffic loads, chemical attack and can be formulated for many other uses.
Clear. Extremely moisture tolerant for green and freshly laid concrete. Can be used as a sealant for concrete and priming for secondary coats.
Coatings designed for application in high temperature environments such as pipes, vessels, chimney stacks, flare stacks, precipitators etc. Coatings can be applied on hot or cold surfaces (up to 190°C) without the need to shutdown. High temperature coating solutions designed to withstand up to 100ºC Caustic process application
Can be applied on hot or cold substrates up to 170ºC. Temp. resistance up to 550ºC. Single pack with exceptional UV, chemical resistance. Surface tolerant (MIO-ZINC) modified. Flair / Chimney stacks, pipework etc.
Multi-purpose, single pack, water-based silicon topcoat with good corrosion resistance property. Ideal for mufflers, ovens, chimneys, oven inserts, electric and gas heaters, hot stacks, high temperature reaction tanks, etc. Excellent heat resistance up to 350ºC. Higher temperature possible up to 600ºC (based on metallic pigment). Can be applied on hot surface up to 120ºC with care and full PPE (due to little co-solvent content of less than 5%).
Can be applied on hot or cold substrates up to 170ºC. Temp. resistance up to 550ºC. Single pack with exceptional UV, chemical resistance. Ideally used as a top-coat/sealer. Allows tank lining to cure insitu.
Epoxy based filled with ceramic, ideal for high temperature and acid resistance.
High-Temperature Solvent-free Glassflake Epoxy. Provides a tough, impermeable barrier suitable for steel and concrete surfaces.
