OVERVIEW: A solution was required to prevent corrosion on existing bridge piles underwater and in the tidal zone. A wet and surface tolerant solution was required.
INDUSTRY
ENVIRONMENT
Immersed, aggressive marine conditions
SUBSTRATE
Bridge Piles
CHALLENGE
The Client required the bridge piles to be repaired and protected from the immersed aggressive marine conditions. A solvent free, underwater coating was required to reduce Microbiological Induced Corrosion (MIC) and provide corrosion resistance to the marine environment.
SOLUTION
RA 500UW was recommended for its solvent free properties and its ability to coat and cure underwater on poorly prepared metal and concrete substrates. This product reduces the risk of both MIC and Sulphate Reducing Bacteria (SRB) and is recommended for the protection of risers, pipes and structures below the splash zone. It is available in different viscosity for application ease
PRODUCTS
OUTCOME
Due to the lack of surface preparation required for this coating application, the bridge pile repairs were completed with minimum downtime and without harm to the environment. Chemco’s specialty coating system RA 500UW and our expertise in operating in difficult work environments, ensures long term corrosion protection for the bridge piles despite the aggressive marine conditions.
RELATED CASE STUDIES
Fast Curing Abrasion Protection
Condition of surface before mechanical preparation RB 364 applied to spot abrasive blasted surfaces Pugmill externals Coating with InD Cote OVERVIEW: Chemcote’s specialist team
Split Case Salt Water Pump Refurbishment
Apply protection to all machined surfaces Application of 1st coat RB 364 Apply Ceram-Chem RP500 Ready to return to service for another 15+ years of
Composite Pipe Repair
Flange is barely attached Repairs commence Repairs using composite weave mat Coating complete OVERVIEW: A power station client required corrosion protection for a 30-plus