Search
Close this search box.

Tiled Concrete Floor

OVERVIEW:    The concrete floor in a chemical process area of the brewery had broken tiles, defective grout and contamination of concrete substrate. It required a coating system and sealing solution that will ensure long-term corrosion in excess of 15 years service.

ENVIRONMENT

Chemicals, atmospheric, no abrasive blasting

SUBSTRATE

Tiled Concrete Floor

CHALLENGE

To provide a coating system offering a long-term corrosion and sealing solution that will ensure in excess of 15 years service to the tiled floor of a brewery. System has to be easily cleaned and resistant to process chemicals. Tiled concrete floor had broken tiles, defective grout and contamination of concrete substrate. Area would not allow abrasive blasting.

SOLUTION

We recommended the 500 series: priming with RX 500P, followed by RA 564 Top coat and RI 800 Grout replacement. This system has an extremely fast turnaround and cure time, with no odour, is food grade approved, easy to clean and will exceed life requirement.

SCOPE

High pressure water blast to remove contamination and loose grout

Application of 1 coat RX 500P at 100 microns to seal and bind tiles

Repairs using RI 800 and 1 coat of RA 564 to a DFT of 200 microns

OUTCOME

Due to the fast turnaround and cure time, there was minimal disruption to the manufacturing process and the easy to maintain system with long life requirement also resulted in reduced maintenance costs for the customer

RELATED CASE STUDIES

Refurbishment of Basket Strainer

After fabrication repairs After abrasive blasting, pitting visible Finished 300 Series Vinyl Ester Internals nearing completion OVERVIEW:    Customer required long term corrosion protection for

Read More »

Duo Chek Valve

Masking and ready for abrasive blasting Application of multiple coats of RB364 internally Holiday testing to ensure coating continuity Coating complete OVERVIEW:    Chemcote was

Read More »
Contact Our Specialist Coating Advisors