OVERVIEW: Environments such as blast furnaces are subject to high temperatures and particulate, which can accelerate the onset of corrosion and erosion. Constant exposure to heat and blast furnace dust over a period time has a damaging impact on steel structures, valves and fittings. This highlights the importance of safeguarding critical infrastructure through preventative maintenance and anti-corrosion solutions.
INDUSTRY
ENVIRONMENT
Blast furnace gas, combined with particulate at elevated temperatures 70degC
SUBSTRATE
Steel
CHALLENGE
Chemcote were tasked with refurbishing a blast furnace where exposure to gas, particulate dust and elevated temperatures of 70oC were present. A requirement to rebuild the internal profile of a blast furnace was a priority as 10-15mm of steel had been eroded. Applying an effective corrosion protection solution in this harsh environment demanded technical expertise combined with a specialist coating.
SOLUTION
Refurbishing corroded internal components of the blast furnace required a protective coating that offered long-term corrosion and erosion protection. Chem-tect™ RB 364 proved the most suitable product to withstand this particular environment.
The first step was to undertake abrasive blasting of both the internal and external steel structure, while avoiding any damage to the insert sealing ring.
The protective coating was then applied to the internal structure to a minimum of 500µm, followed by pit filling, a cast insert where required, and a second coating of RB 364.
SCOPE
Abrasive blast internals and externals, taking care not to damage the insert sealing ring.
Internal application of RB 364 to a minimum of 500µm
Sand smooth and pitfill with RB 364
Cast insert where required
Application of 2nd coat of RB 364
PRODUCTS
OUTCOME
Following project completion, the coating application coupled with future scheduled inspections delivered long-term protection and an extended life expectancy of the Blast Furnace valve
RELATED CASE STUDIES
Blast Furnace Recovery Turbine Repairs
Set up of Containment Masking before Blasting Spool Condition before Coating Aerial view of Outlet Spool from Shutoff Valve Completed Outlet Spool Internals Application of
Long Term Protection Of ISOtainers
Newly fabricated tank internals Tank Internals Confined space entry Completed tanks for delivery to customer OVERVIEW: The asset owner approached us to provide protection
Floating Restaurant Structure Repairs Using Underwater Curing Epoxies
Condition before surface preparation Mechanical Preparation Primer Application Second Coat applied OVERVIEW: In the complete refurbishment of the underside of this floating structure, some
